Network Working Group B. Fenner Request for Comments: 4624 AT&T Research Category: Experimental D. Thaler Microsoft October 2006 Multicast Source Discovery Protocol (MSDP) MIB Status of This Memo This memo defines an Experimental Protocol for the Internet community. It does not specify an Internet standard of any kind. Discussion and suggestions for improvement are requested. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (2006). Abstract This memo defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing Multicast Source Discovery Protocol (MSDP) (RFC 3618) speakers. Table of Contents 1. Introduction ....................................................2 2. The Internet-Standard Management Framework ......................2 3. Overview ........................................................2 4. Definitions .....................................................3 5. Security Considerations ........................................28 6. IANA Considerations ............................................29 7. Acknowledgements ...............................................30 8. References .....................................................30 8.1. Normative References ......................................30 8.2. Informative References ....................................30 Fenner & Thaler Experimental [Page 1] RFC 4624 MSDP MIB October 2006 1. Introduction This memo defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing Multicast Source Discovery Protocol (MSDP) [1] speakers. 2. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [7]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [4], STD 58, RFC 2579 [5] and STD 58, RFC 2580 [6]. 3. Overview This MIB module contains four scalars and four tables, one deprecated. The tables are: o The deprecated Requests Table, containing the longest-match table used to determine the peer to send SA-Requests to for a given group. This table is deprecated because Requests were removed from MSDP before it became an RFC. o The Peer Table, containing information on the system's peers. o The Source-Active (SA) Cache Table, containing the SA cache entries. o The Mesh Group Table, containing the list of MSDP mesh groups to which this system belongs. This MIB module uses the IpAddress SYNTAX, making it only suitable for IPv4 systems. Although the desired direction for MIBs is to use InetAddressType/InetAddress pairs to allow both IPv4 and IPv6 (and future formats as well), the MSDP protocol itself is IPv4-only, and the MSDP working group made an explicit decision not to create an IPv6 version of the protocol. Fenner & Thaler Experimental [Page 2] RFC 4624 MSDP MIB October 2006 This MIB module is somewhat disorganized, with scalars before and after tables, holes in the OID space, tables with the RowStatus in the middle, and so on. This is because objects were added and removed as necessary as the MSDP protocol evolved, and the plan was to renumber the whole MIB when moving to the standard mib-2 tree. The MSDP Working Group then changed direction, publishing the MSDP protocol as Experimental. Since there were existing implementations using the strange object order under the experimental OID, the WG decided not to renumber the MIB and to publish it as experimental, keeping the experimental OID. 4. Definitions -- -- MSDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, experimental, Counter32, Gauge32, TimeTicks, Integer32, IpAddress FROM SNMPv2-SMI RowStatus, TruthValue, TimeStamp, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; msdpMIB MODULE-IDENTITY LAST-UPDATED "200608010000Z" ORGANIZATION "IETF MBONED Working Group" CONTACT-INFO "Bill Fenner 75 Willow Road Menlo Park, CA 94025 Phone: +1 650 867 6073 E-mail: fenner@research.att.com Dave Thaler One Microsoft Way Redmond, WA 98052 Phone: +1 425 703 8835 Email: dthaler@microsoft.com MBONED Working Group: mboned@lists.uoregon.edu" DESCRIPTION "An experimental MIB module for MSDP Management and Monitoring. Fenner & Thaler Experimental [Page 3] RFC 4624 MSDP MIB October 2006 Copyright (C) The Internet Society 2006. This version of this MIB module is part of RFC 4624; see the RFC itself for full legal notices." REVISION "200608010000Z" DESCRIPTION "Initial version, published as RFC 4624." ::= { experimental 92 } msdpMIBobjects OBJECT IDENTIFIER ::= { msdpMIB 1 } msdp OBJECT IDENTIFIER ::= { msdpMIBobjects 1 } msdpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of MSDP on this MSDP speaker - globally enabled or disabled. Changes to this object should be stored to non-volatile memory." ::= { msdp 1 } msdpCacheLifetime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS current DESCRIPTION "The lifetime given to SA cache entries when created or refreshed. This is the [SG-State-Period] in the MSDP spec. A value of 0 means no SA caching is done by this MSDP speaker. Changes to this object should be stored to non-volatile memory. This object does not measure time per se; instead, it is the delta from the time at which an SA message is received at which it should be expired if not refreshed. (i.e., it is the value of msdpSACacheExpiryTime immediately after receiving an SA message applying to that row.) As such, TimeInterval would be a more appropriate SYNTAX; it remains TimeTicks for backwards compatibility." REFERENCE "RFC 3618 section 5.3" ::= { msdp 2 } Fenner & Thaler Experimental [Page 4] RFC 4624 MSDP MIB October 2006 msdpNumSACacheEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of entries in the SA Cache table." ::= { msdp 3 } -- -- The spec doesn't define SA-Hold-Down-Period any more. -- msdpSAHoldDownPeriod OBJECT-TYPE -- ::= { msdp 9 } -- This object was introduced in error, with a similar definition -- to msdpCacheLifetime. -- msdpSAStatePeriod OBJECT-TYPE -- ::= { msdp 10 } msdpRPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Rendezvous Point (RP) address used when sourcing MSDP SA messages. May be 0.0.0.0 on non-RPs. Changes to this object should be stored to non-volatile memory." ::= { msdp 11 } -- -- The MSDP Requests table -- SA Requests were removed from the MSDP spec, so this entire table -- is deprecated. msdpRequestsTable OBJECT-TYPE SYNTAX SEQUENCE OF MsdpRequestsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table listing group ranges and MSDP peers used when deciding where to send an SA Request message, when required. If SA Requests are not enabled, this table may be empty. In order to choose a peer to whom to send an SA Request for a given group, G, the subset of entries in this table whose (msdpRequestsPeerType, msdpRequestsPeer) tuple represents a Fenner & Thaler Experimental [Page 5] RFC 4624 MSDP MIB October 2006 peer whose msdpPeerState is established are examined. The set is further reduced by examining only those entries for which msdpPeerRequestsGroupAddressType equals the address type of G. The entries with the highest value of msdpRequestsGroupPrefix are considered, where the group G falls within the range described by the combination of msdpRequestsGroup and msdpRequestsGroupPrefix. (This sequence is commonly known as a 'longest-match' lookup.) Finally, if multiple entries remain, the entry with the lowest value of msdpRequestsPriority is chosen. The SA Request message is sent to the peer described by this row." ::= { msdp 4 } msdpRequestsEntry OBJECT-TYPE SYNTAX MsdpRequestsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) representing a group range used when deciding where to send an SA Request message." INDEX { msdpRequestsGroupAddress, msdpRequestsGroupMask } ::= { msdpRequestsTable 1 } MsdpRequestsEntry ::= SEQUENCE { msdpRequestsGroupAddress IpAddress, msdpRequestsGroupMask IpAddress, msdpRequestsPeer IpAddress, msdpRequestsStatus RowStatus } msdpRequestsGroupAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The group address that, when combined with the mask in this entry, represents the group range to which this row applies." ::= { msdpRequestsEntry 1 } msdpRequestsGroupMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The mask that, when combined with the group address Fenner & Thaler Experimental [Page 6] RFC 4624 MSDP MIB October 2006 in this entry, represents the group range to which this row applies." ::= { msdpRequestsEntry 2 } msdpRequestsPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The peer to which MSDP SA Requests for groups matching this entry's group range will be sent. This object, combined with msdpRequestsPeerType, must match the INDEX of a row in the msdpPeerTable, and to be considered, this peer's msdpPeerState must be established." ::= { msdpRequestsEntry 3 } msdpRequestsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of this row, by which new rows may be added to the table or old rows may be deleted." ::= { msdpRequestsEntry 4 } -- -- The MSDP Peer table -- msdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MsdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the MSDP speaker's peers." ::= { msdp 5 } msdpPeerEntry OBJECT-TYPE SYNTAX MsdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an MSDP peer. If row creation is supported, dynamically added rows are added to the system's stable configuration (corresponding to a StorageType value of nonVolatile). " Fenner & Thaler Experimental [Page 7] RFC 4624 MSDP MIB October 2006 INDEX { msdpPeerRemoteAddress } ::= { msdpPeerTable 1 } MsdpPeerEntry ::= SEQUENCE { msdpPeerRemoteAddress IpAddress, msdpPeerState INTEGER, msdpPeerRPFFailures Counter32, msdpPeerInSAs Counter32, msdpPeerOutSAs Counter32, msdpPeerInSARequests Counter32, msdpPeerOutSARequests Counter32, msdpPeerInSAResponses Counter32, msdpPeerOutSAResponses Counter32, msdpPeerInControlMessages Counter32, msdpPeerOutControlMessages Counter32, msdpPeerInDataPackets Counter32, msdpPeerOutDataPackets Counter32, msdpPeerFsmEstablishedTransitions Counter32, msdpPeerFsmEstablishedTime TimeStamp, msdpPeerInMessageTime TimeStamp, msdpPeerLocalAddress IpAddress, msdpPeerConnectRetryInterval Integer32, msdpPeerHoldTimeConfigured Integer32, msdpPeerKeepAliveConfigured Integer32, msdpPeerDataTtl Integer32, msdpPeerProcessRequestsFrom TruthValue, msdpPeerStatus RowStatus, msdpPeerRemotePort Integer32, msdpPeerLocalPort Integer32, msdpPeerEncapsulationType INTEGER, msdpPeerConnectionAttempts Counter32, msdpPeerInNotifications Counter32, msdpPeerOutNotifications Counter32, msdpPeerLastError OCTET STRING, msdpPeerDiscontinuityTime TimeStamp } msdpPeerRemoteAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the remote MSDP peer." ::= { msdpPeerEntry 1 } -- dunno what happened to 2. msdpPeerState OBJECT-TYPE Fenner & Thaler Experimental [Page 8] RFC 4624 MSDP MIB October 2006 SYNTAX INTEGER { inactive(1), listen(2), connecting(3), established(4), disabled(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the MSDP TCP connection with this peer." ::= { msdpPeerEntry 3 } msdpPeerRPFFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SA messages received from this peer that failed the Peer-RPF check. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 4 } msdpPeerInSAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 5 } msdpPeerOutSAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA messages transmitted on this connection. Fenner & Thaler Experimental [Page 9] RFC 4624 MSDP MIB October 2006 Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 6 } msdpPeerInSARequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA-Request messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 7 } msdpPeerOutSARequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA-Request messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 8 } msdpPeerInSAResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of MSDP SA-Response messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 9 } Fenner & Thaler Experimental [Page 10] RFC 4624 MSDP MIB October 2006 msdpPeerOutSAResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of MSDP SA Response messages transmitted on this TCP connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 10 } msdpPeerInControlMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MSDP messages, excluding encapsulated data packets, received on this TCP connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 11 } msdpPeerOutControlMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MSDP messages, excluding encapsulated data packets, transmitted on this TCP connection. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 12 } msdpPeerInDataPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of encapsulated data packets received Fenner & Thaler Experimental [Page 11] RFC 4624 MSDP MIB October 2006 from this peer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 13 } msdpPeerOutDataPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of encapsulated data packets sent to this peer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of msdpPeerDiscontinuityTime." ::= { msdpPeerEntry 14 } msdpPeerFsmEstablishedTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the MSDP FSM transitioned into the ESTABLISHED state." REFERENCE "RFC 3618 section 11" ::= { msdpPeerEntry 15 } msdpPeerFsmEstablishedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This timestamp is set to the value of sysUpTime when a peer transitions into or out of the ESTABLISHED state. It is set to zero when the MSDP speaker is booted." REFERENCE "RFC 3618 section 11" ::= { msdpPeerEntry 16 } msdpPeerInMessageTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION Fenner & Thaler Experimental [Page 12] RFC 4624 MSDP MIB October 2006 "The sysUpTime value when the last MSDP message was received from the peer. It is set to zero when the MSDP speaker is booted." ::= { msdpPeerEntry 17 } msdpPeerLocalAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The local IP address used for this entry's MSDP TCP connection." ::= { msdpPeerEntry 18 } -- msdpPeerSAAdvPeriod ([SA-Advertisement-Timer]) has been removed. -- ::= { msdpPeerEntry 19 } -- RFC 3618, Section 5.1, says it MUST be 60 seconds. msdpPeerConnectRetryInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval, in seconds, for the [ConnectRetry-period] for this peer." REFERENCE "RFC 3618 section 5.6" DEFVAL { 30 } ::= { msdpPeerEntry 20 } msdpPeerHoldTimeConfigured OBJECT-TYPE SYNTAX Integer32 (0|3..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval, in seconds, for the [HoldTime-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), the MSDP connection is never torn down due to the absence of messages from the peer." REFERENCE "RFC 3618 section 5.4" DEFVAL { 75 } ::= { msdpPeerEntry 21 } msdpPeerKeepAliveConfigured OBJECT-TYPE SYNTAX Integer32 (0|1..21845) Fenner & Thaler Experimental [Page 13] RFC 4624 MSDP MIB October 2006 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval, in seconds, for the [KeepAlive-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), no periodic KEEPALIVE messages are sent to the peer after the MSDP connection has been established." REFERENCE "RFC 3618 section 5.5" DEFVAL { 60 } ::= { msdpPeerEntry 22 } msdpPeerDataTtl OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum TTL a packet is required to have before it may be forwarded using SA encapsulation to this peer." DEFVAL { 1 } ::= { msdpPeerEntry 23 } msdpPeerProcessRequestsFrom OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object indicates whether to process MSDP SA Request messages from this peer. If True(1), MSDP SA Request messages from this peer are processed and replied to (if appropriate) with SA Response messages. If False(2), MSDP SA Request messages from this peer are silently ignored. It defaults to False when msdpCacheLifetime is 0 and to True when msdpCacheLifetime is non-0. This object is deprecated because MSDP SA Requests were removed from the MSDP specification." ::= { msdpPeerEntry 24 } msdpPeerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP Fenner & Thaler Experimental [Page 14] RFC 4624 MSDP MIB October 2006 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. msdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the msdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1)." REFERENCE "RFC 3618 section 11.1" ::= { msdpPeerEntry 25 } msdpPeerRemotePort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote port for the TCP connection between the MSDP peers." DEFVAL { 639 } ::= { msdpPeerEntry 26 } msdpPeerLocalPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The local port for the TCP connection between the MSDP peers." DEFVAL { 639 } ::= { msdpPeerEntry 27 } -- msdpPeerEncapsulationState has been removed -- because there is no longer an encapsulation -- state machine. -- ::= { msdpPeerEntry 28 } msdpPeerEncapsulationType OBJECT-TYPE SYNTAX INTEGER { none(0), tcp(1) } MAX-ACCESS read-create STATUS current Fenner & Thaler Experimental [Page 15] RFC 4624 MSDP MIB October 2006 DESCRIPTION "The encapsulation in use when encapsulating data in SA messages to this peer." ::= { msdpPeerEntry 29 } msdpPeerConnectionAttempts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the state machine has transitioned from INACTIVE to CONNECTING." ::= { msdpPeerEntry 30 } msdpPeerInNotifications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of MSDP Notification messages received from this peer. This object is deprecated because MSDP Notifications have been removed from the spec." ::= { msdpPeerEntry 31 } msdpPeerOutNotifications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of MSDP Notification messages transmitted to this peer. This object is deprecated because MSDP Notifications have been removed from the spec." ::= { msdpPeerEntry 32 } msdpPeerLastError OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The last error code and subcode received via Notification from this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two-byte OCTET STRING contains the O-bit and error code, and the second byte contains the subcode. Fenner & Thaler Experimental [Page 16] RFC 4624 MSDP MIB October 2006 This object is deprecated because MSDP Notifications have been removed from the spec." DEFVAL { '0000'h } ::= { msdpPeerEntry 33 } msdpPeerDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which one or more of this entry's counters suffered a discontinuity. See the DESCRIPTION of each object to see if it is expected to have discontinuities. These discontinuities may occur at peer connection establishment. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value." ::= { msdpPeerEntry 34 } -- -- The MSDP Source-Active Cache table -- msdpSACacheTable OBJECT-TYPE SYNTAX SEQUENCE OF MsdpSACacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the MSDP SA advertisements currently in the MSDP speaker's cache." ::= { msdp 6 } msdpSACacheEntry OBJECT-TYPE SYNTAX MsdpSACacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an MSDP SA advertisement. The INDEX to this table includes msdpSACacheOriginRP for diagnosing incorrect MSDP advertisements; normally, a Group and Source pair would be unique. Row creation is not permitted; msdpSACacheStatus may only be used to delete rows from this table." Fenner & Thaler Experimental [Page 17] RFC 4624 MSDP MIB October 2006 INDEX { msdpSACacheGroupAddr, msdpSACacheSourceAddr, msdpSACacheOriginRP } ::= { msdpSACacheTable 1 } MsdpSACacheEntry ::= SEQUENCE { msdpSACacheGroupAddr IpAddress, msdpSACacheSourceAddr IpAddress, msdpSACacheOriginRP IpAddress, msdpSACachePeerLearnedFrom IpAddress, msdpSACacheRPFPeer IpAddress, msdpSACacheInSAs Counter32, msdpSACacheInDataPackets Counter32, msdpSACacheUpTime TimeTicks, msdpSACacheExpiryTime TimeTicks, msdpSACacheStatus RowStatus } msdpSACacheGroupAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address of the SA Cache entry." ::= { msdpSACacheEntry 1 } msdpSACacheSourceAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The source address of the SA Cache entry." ::= { msdpSACacheEntry 2 } msdpSACacheOriginRP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RP of the SA Cache entry. This field is in the INDEX in order to catch multiple RP's advertising the same source and group." ::= { msdpSACacheEntry 3 } msdpSACachePeerLearnedFrom OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION Fenner & Thaler Experimental [Page 18] RFC 4624 MSDP MIB October 2006 "The peer from which this SA Cache entry was last accepted. This address must correspond to the msdpPeerRemoteAddress value for a row in the MSDP Peer Table. This should be 0.0.0.0 on the router that originated the entry." ::= { msdpSACacheEntry 4 } msdpSACacheRPFPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer from which an SA message corresponding to this cache entry would be accepted (i.e., the RPF peer for msdpSACacheOriginRP). This may be different than msdpSACachePeerLearnedFrom if this entry was created by an MSDP SA-Response. This address must correspond to the msdpPeerRemoteAddress value for a row in the MSDP Peer Table, or it may be 0.0.0.0 if no RPF peer exists." ::= { msdpSACacheEntry 5 } msdpSACacheInSAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP SA messages received relevant to this cache entry. This object must be initialized to zero when creating a cache entry." ::= { msdpSACacheEntry 6 } msdpSACacheInDataPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MSDP-encapsulated data packets received relevant to this cache entry. This object must be initialized to zero when creating a cache entry." ::= { msdpSACacheEntry 7 } msdpSACacheUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this entry was first placed in the SA cache. Fenner & Thaler Experimental [Page 19] RFC 4624 MSDP MIB October 2006 The first epoch is the time that the entry was first placed in the SA cache, and the second epoch is the current time." ::= { msdpSACacheEntry 8 } msdpSACacheExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining before this entry will expire from the SA cache. The first epoch is now, and the second epoch is the time that the entry will expire." ::= { msdpSACacheEntry 9 } msdpSACacheStatus OBJECT-TYPE SYNTAX RowStatus { active(1), destroy(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row in the table. The only allowable actions are to retrieve the status, which will be 'active', or to set the status to 'destroy' in order to remove this entry from the cache. Row creation is not permitted. No columnar objects are writable, so there are none that may be changed while the status value is active(1)." ::= { msdpSACacheEntry 10 } -- -- MSDP Mesh Group Membership table -- msdpMeshGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MsdpMeshGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing MSDP Mesh Group configuration." ::= { msdp 12 } msdpMeshGroupEntry OBJECT-TYPE Fenner & Thaler Experimental [Page 20] RFC 4624 MSDP MIB October 2006 SYNTAX MsdpMeshGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a peer in an MSDP Mesh Group. If row creation is supported, dynamically added rows are added to the system's stable configuration (corresponding to a StorageType value of nonVolatile)." INDEX { msdpMeshGroupName, msdpMeshGroupPeerAddress } ::= { msdpMeshGroupTable 1 } MsdpMeshGroupEntry ::= SEQUENCE { msdpMeshGroupName DisplayString, msdpMeshGroupPeerAddress IpAddress, msdpMeshGroupStatus RowStatus } msdpMeshGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the mesh group." ::= { msdpMeshGroupEntry 1 } msdpMeshGroupPeerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A peer address that is a member of the mesh group with name msdpMeshGroupName. The msdpMeshGroupPeerAddress must match a row in the msdpPeerTable." ::= { msdpMeshGroupEntry 2 } msdpMeshGroupStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This entry's status, by which new entries may be added to the table and old entries deleted. msdpMeshGroupName and msdpMeshGroupPeerAddress must be set to valid values before the row can be activated. Since these are the table's INDEX, a row can be activated Fenner & Thaler Experimental [Page 21] RFC 4624 MSDP MIB October 2006 by simply setting the msdpMeshGroupStatus variable. It is not possible to modify other columns in the same conceptual row when the status value is active(1), because the only other objects in the row are part of the INDEX. Changing one of these changes the row, so an old row must be deleted and a new one created." ::= { msdpMeshGroupEntry 3 } -- Traps msdpTraps OBJECT IDENTIFIER ::= { msdp 0 } msdpEstablished NOTIFICATION-TYPE OBJECTS { msdpPeerFsmEstablishedTransitions } STATUS current DESCRIPTION "The MSDP Established event is generated when the MSDP FSM enters the ESTABLISHED state." ::= { msdpTraps 1 } msdpBackwardTransition NOTIFICATION-TYPE OBJECTS { msdpPeerState } STATUS current DESCRIPTION "The MSDPBackwardTransition Event is generated when the MSDP FSM moves from a higher-numbered state to a lower-numbered state." ::= { msdpTraps 2 } -- conformance information msdpMIBConformance OBJECT IDENTIFIER ::= { msdp 8 } msdpMIBCompliances OBJECT IDENTIFIER ::= { msdpMIBConformance 1 } msdpMIBGroups OBJECT IDENTIFIER ::= { msdpMIBConformance 2 } -- compliance statements msdpMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities that implement a pre- RFC version of MSDP. This statement is deprecated because it includes objects used for managing/monitoring aspects of MSDP that were removed before it was published as an RFC." MODULE -- this module MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup, Fenner & Thaler Experimental [Page 22] RFC 4624 MSDP MIB October 2006 msdpMIBNotificationGroup } GROUP msdpMIBEncapsulationGroup DESCRIPTION "This group is mandatory if MSDP encapsulation interfaces are not given their own interface index numbers." GROUP msdpMIBSACacheGroup DESCRIPTION "This group is mandatory if the MSDP speaker has the ability to cache SA messages." GROUP msdpMIBRequestsGroup DESCRIPTION "This group is mandatory if the MSDP speaker has the ability to send SA-Request messages and to parse SA-Response messages." GROUP msdpMIBRPGroup DESCRIPTION "This group is mandatory if the MSDP speaker sources (as opposed to forwards) MSDP messages." GROUP msdpMIBMeshGroupGroup DESCRIPTION "This group is mandatory if the MSDP speaker can participate in MSDP Mesh Groups." ::= { msdpMIBCompliances 1 } msdpMIBFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement MSDP (RFC3618)." MODULE -- this module MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup2, msdpMIBSACacheGroup, msdpMIBEncapsulationGroup } GROUP msdpMIBRPGroup DESCRIPTION "This group is mandatory if the MSDP speaker sources (as opposed to forwards) MSDP messages." GROUP msdpMIBMeshGroupGroup DESCRIPTION "This group is mandatory if the MSDP speaker can participate in MSDP Mesh Groups." ::= { msdpMIBCompliances 2 } msdpMIBReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement MSDP (RFC3618), but do not permit configuration (or only permit Fenner & Thaler Experimental [Page 23] RFC 4624 MSDP MIB October 2006 partial configuration) via SNMP." MODULE -- this module MANDATORY-GROUPS { msdpMIBGlobalsGroup, msdpMIBPeerGroup2, msdpMIBSACacheGroup, msdpMIBEncapsulationGroup } GROUP msdpMIBRPGroup DESCRIPTION "This group is mandatory if the MSDP speaker sources (as opposed to forwards) MSDP messages." GROUP msdpMIBMeshGroupGroup DESCRIPTION "This group is mandatory if the MSDP speaker can participate in MSDP Mesh Groups." OBJECT msdpEnabled MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpCacheLifetime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpPeerLocalAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpPeerConnectRetryInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpPeerHoldTimeConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpPeerKeepAliveConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpPeerDataTtl MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpPeerStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpPeerEncapsulationType MIN-ACCESS read-only DESCRIPTION "Write access is not required." Fenner & Thaler Experimental [Page 24] RFC 4624 MSDP MIB October 2006 OBJECT msdpSACacheStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpRPAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT msdpMeshGroupStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { msdpMIBCompliances 3 } -- units of conformance msdpMIBGlobalsGroup OBJECT-GROUP OBJECTS { msdpEnabled } STATUS current DESCRIPTION "A collection of objects providing information on global MSDP state." ::= { msdpMIBGroups 1 } msdpMIBPeerGroup OBJECT-GROUP OBJECTS { msdpPeerRPFFailures, msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs, msdpPeerInSARequests, msdpPeerOutSARequests, msdpPeerInSAResponses, msdpPeerOutSAResponses, msdpPeerInNotifications, msdpPeerOutNotifications, msdpPeerInControlMessages, msdpPeerOutControlMessages, msdpPeerFsmEstablishedTransitions, msdpPeerFsmEstablishedTime, msdpPeerLocalAddress, msdpPeerRemotePort, msdpPeerLocalPort, msdpPeerConnectRetryInterval, msdpPeerHoldTimeConfigured, msdpPeerKeepAliveConfigured, msdpPeerInMessageTime, msdpPeerProcessRequestsFrom, msdpPeerConnectionAttempts, msdpPeerLastError, msdpPeerStatus, msdpPeerDiscontinuityTime } STATUS deprecated DESCRIPTION "A collection of objects for managing MSDP peers. This group Fenner & Thaler Experimental [Page 25] RFC 4624 MSDP MIB October 2006 is deprecated in favor of msdpMIBPeerGroup2 because it contains objects for managing aspects of MSDP that were removed before it was published as an RFC." ::= { msdpMIBGroups 2 } msdpMIBEncapsulationGroup OBJECT-GROUP OBJECTS { msdpPeerInDataPackets, msdpPeerOutDataPackets, msdpPeerDataTtl, msdpPeerEncapsulationType } STATUS current DESCRIPTION "A collection of objects for managing encapsulations if the MSDP encapsulation interfaces are not given interface indices." ::= { msdpMIBGroups 3 } msdpMIBSACacheGroup OBJECT-GROUP OBJECTS { msdpCacheLifetime, msdpNumSACacheEntries, msdpSACachePeerLearnedFrom, msdpSACacheRPFPeer, msdpSACacheInSAs, msdpSACacheInDataPackets, msdpSACacheUpTime, msdpSACacheExpiryTime, msdpSACacheStatus } STATUS current DESCRIPTION "A collection of objects for managing MSDP SA cache entries." ::= { msdpMIBGroups 4 } msdpMIBNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { msdpEstablished, msdpBackwardTransition } STATUS current DESCRIPTION "A collection of notifications for signaling changes in MSDP peer relationships." ::= { msdpMIBGroups 5 } msdpMIBRequestsGroup OBJECT-GROUP OBJECTS { msdpRequestsPeer, msdpRequestsStatus } STATUS deprecated DESCRIPTION "A collection of objects for managing MSDP Request transmission. This group is deprecated because Requests were removed from MSDP before its publication as an RFC." ::= { msdpMIBGroups 6 } msdpMIBRPGroup OBJECT-GROUP Fenner & Thaler Experimental [Page 26] RFC 4624 MSDP MIB October 2006 OBJECTS { msdpRPAddress } STATUS current DESCRIPTION "A collection of objects for MSDP speakers that source MSDP messages." ::= { msdpMIBGroups 7 } msdpMIBMeshGroupGroup OBJECT-GROUP OBJECTS { msdpMeshGroupStatus } STATUS current DESCRIPTION "A collection of objects for MSDP speakers that can participate in MSDP mesh groups." ::= { msdpMIBGroups 8 } msdpMIBPeerGroup2 OBJECT-GROUP OBJECTS { msdpPeerRPFFailures, msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs, msdpPeerInSARequests, msdpPeerOutSARequests, msdpPeerInControlMessages, msdpPeerOutControlMessages, msdpPeerFsmEstablishedTransitions, msdpPeerFsmEstablishedTime, msdpPeerLocalAddress, msdpPeerRemotePort, msdpPeerLocalPort, msdpPeerConnectRetryInterval, msdpPeerHoldTimeConfigured, msdpPeerKeepAliveConfigured, msdpPeerInMessageTime, msdpPeerConnectionAttempts, msdpPeerStatus, msdpPeerDiscontinuityTime } STATUS current DESCRIPTION "A collection of objects for managing MSDP peers." ::= { msdpMIBGroups 9 } END Fenner & Thaler Experimental [Page 27] RFC 4624 MSDP MIB October 2006 5. Security Considerations There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are the tables and objects and their sensitivity/vulnerability: msdpEnabled Obviously, by modifying msdpEnabled, an attacker could simply disable MSDP processing on the router. msdpCacheLifetime If allowed to modify msdpCacheLifetime, an attacker could set the value to a value lower than a peer's refresh interval, causing all state to time out and be refreshed. msdpRequestsPeer, msdpRequestsStatus If allowed to modify entries in the msdpRequestsTable, an attacker could cause this system to send MSDP Requests to an unknown system, or could simply remove the proper configuration. Note that the msdpRequestsTable is deprecated, and the MSDP Request functionality is not in the published MSDP spec. msdpPeerTable objects The writable objects in the msdpPeerTable are: msdpPeerLocalAddress, msdpPeerConnectRetryInterval, msdpPeerHoldTimeConfigured, msdpPeerKeepAliveConfigured, msdpPeerDataTtl, msdpPeerProcessRequestsFrom, msdpPeerStatus, and msdpPeerEncapsulationType. Of these, modifying msdpPeerIpAddress and msdpPeerStatus could cause a changed or deleted peer configuration. Modifying any of the other values could cause subtle protocol misbehavior. msdpSACacheStatus This writable object can be used to remove valid values from the router's SA cache. msdpRPAddress Changing this object can cause a failure of the Peer-RPF rules for SA messages sourced by this router. msdpMeshGroupStatus This object can be used to change this router's idea of its mesh group membership and those of its peers. Misconfiguration of mesh groups can cause subtle protocol misbehavior. Fenner & Thaler Experimental [Page 28] RFC 4624 MSDP MIB October 2006 Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability: o The entire msdpPeerTable. Peer information can result in discovering internal topology, which many want to keep secret. o msdpNumSACacheEntries. The size of the SA Cache could reveal whether this system has MSDP entries for public and/or private groups. o The entire msdpSACacheTable. The active sources and groups in a network could be private. o The entire msdpMeshGroupTable. This information can also lead to internal topology information. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [6], Section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. 6. IANA Considerations Since this MIB is for an experimental protocol, it uses an experimental OID. Decimal Name Description References ------- ---- ----------- ---------- 92 MSDP-MIB Multicast Source Discovery MIB RFC 4624 Fenner & Thaler Experimental [Page 29] RFC 4624 MSDP MIB October 2006 7. Acknowledgements Tom Pusateri and Billy Ng both provided valuable input on early versions of this document. It was completed with feedback from Mike Davison and Ketan Talaulikar. Lucy Lynch provided a desperately needed reminder to finish this document. 8. References 8.1 Normative References [1] Fenner, B., Ed., and D. Meyer, Ed., "Multicast Source Discovery Protocol (MSDP)", RFC 3618, October 2003. [2] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", STD 62, RFC 3414, December 2002. [3] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", STD 62, RFC 3415, December 2002. [4] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [5] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [6] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. 8.2. Informative References [7] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002. Fenner & Thaler Experimental [Page 30] RFC 4624 MSDP MIB October 2006 Authors' Addresses Bill Fenner 1 River Oaks Place San Jose, CA 95134-1918 Phone: +1 (408 493-8505 EMail: fenner@research.att.com Dave Thaler Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399 Phone: +1 425 703 8835 EMail: dthaler@microsoft.com Fenner & Thaler Experimental [Page 31] RFC 4624 MSDP MIB October 2006 Full Copyright Statement Copyright (C) The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Fenner & Thaler Experimental [Page 32]