Internet-Draft | Root Zone Trust Anchor Publication | August 2024 |
Abley, et al. | Expires 2 March 2025 | [Page] |
The root zone of the global Domain Name System (DNS) is cryptographically signed using DNS Security Extensions (DNSSEC).¶
In order to obtain secure answers from the root zone of the DNS using DNSSEC, a client must configure a suitable trust anchor. This document describes the format and publication mechanisms IANA uses to distribute the DNSSEC trust anchors.¶
This document obsoletes RFC 7958.¶
This note is to be removed before publishing as an RFC.¶
Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-dnsop-rfc7958bis/.¶
Source for this draft and an issue tracker can be found at https://github.com/paulehoffman/draft-bash-rfc7958bis.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 2 March 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The global Domain Name System (DNS) is described in [RFC1034] and [RFC1035]. DNS Security Extensions (DNSSEC) are described in [RFC9364].¶
In the DNSSEC protocol, Resource Record Sets (RRSets) are signed cryptographically. This means that a response to a query contains signatures that allow the integrity and authenticity of the RRSet to be verified. DNSSEC signatures are validated by following a chain of signatures to a "trust anchor". The reason for trusting a trust anchor is outside the DNSSEC protocol, but having one or more trust anchors is required for the DNSSEC protocol to work.¶
The publication of trust anchors for the root zone of the DNS is an IANA function performed by ICANN, through its affiliate Public Technical Identifiers (PTI). A detailed description of corresponding key management practices can be found in [DPS].¶
This document describes the formats and distribution methods of DNSSEC trust anchors that is used by IANA for the root zone of the DNS. Other organizations might have different formats and mechanisms for distributing DNSSEC trust anchors for the root zone; however, most operators and software vendors have chosen to rely on the IANA trust anchors.¶
The formats and distribution methods described in this document are a complement to, not a substitute for, the automated DNSSEC trust anchor update protocol described in [RFC5011]. That protocol allows for secure in-band succession of trust anchors when trust has already been established. This document describes one way to establish an initial trust anchor that can be used by [RFC5011].¶
This document obsoletes [RFC7958].¶
The term "trust anchor" is used in many different contexts in the security community. Many of the common definitions conflict because they are specific to a specific system, such as just for DNSSEC or just for S/MIME messages.¶
In cryptographic systems with hierarchical structure, a trust anchor is an authoritative entity for which trust is assumed and not derived. The format of the entity differs in different systems, but the basic idea, the decision to trust this entity is made outside of the system that relies on it, is common to all the common uses of the term "trust anchor".¶
The root zone trust anchor formats published by IANA are defined in Section 2. [RFC4033] defines a trust anchor as "A configured DNSKEY RR or DS RR hash of a DNSKEY RR". Note that the formats defined here do not match the definition of "trust anchor" from [RFC4033]; however, a system that wants to convert the trusted material from IANA into a Delegation Signer (DS) RR can do so.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
IANA publishes trust anchors for the root zone as an XML document that contains the hashes of the DNSKEY records and optionally the keys from the DNSKEY records.¶
This format and the semantics associated are described in the rest of this section.¶
Note that the XML document can have XML comments. For example, IANA might use these comments to add pointers to important information on the IANA web site. XML comments are only used as human-readable commentary, not extensions to the grammar.¶
The XML document contains a set of hashes for the DNSKEY records that can be used to validate the root zone. The hashes are consistent with the defined presentation format of a DS resource.¶
The XML document also can contain the keys and flags from the DNSKEY records. The keys and flags are consistent with the defined presentation format of a DNSKEY resource.¶
Note that the hashes are mandatory in the syntax, but the keys are optional.¶
A RELAX NG Compact Schema [RELAX-NG] for the documents used to publish trust anchors is:¶
datatypes xsd = "http://www.w3.org/2001/XMLSchema-datatypes" start = element TrustAnchor { attribute id { xsd:string }, attribute source { xsd:string }, element Zone { xsd:string }, keydigest+ } keydigest = element KeyDigest { attribute id { xsd:string }, attribute validFrom { xsd:dateTime }, attribute validUntil { xsd:dateTime }?, element KeyTag { xsd:nonNegativeInteger { maxInclusive = "65535" } }, element Algorithm { xsd:nonNegativeInteger { maxInclusive = "255" } }, element DigestType { xsd:nonNegativeInteger { maxInclusive = "255" } }, element Digest { xsd:hexBinary }, publickeyinfo? } publickeyinfo = element PublicKey { xsd:base64Binary }, element Flags { xsd:nonNegativeInteger { maxInclusive = "65535" } }¶
The TrustAnchor
element is the container for all of the trust anchors
in the file.¶
The id
attribute in the TrustAnchor element is an opaque string that
identifies the set of trust anchors. Its value has no particular
semantics. Note that the id
element in the TrustAnchor element is
different than the id
element in the KeyDigest element, described
below.¶
The source
attribute in the TrustAnchor element gives information
about where to obtain the TrustAnchor container. It is likely to be
a URL and is advisory only.¶
The Zone element in the TrustAnchor element states to which DNS zone this container applies. The element is in presentation format as specified in [RFC1035], including the trailing dot. The root zone is indicated by a single period (.) character without any quotation marks.¶
The TrustAnchor element contains one or more KeyDigest elements. Each KeyDigest element represents the digest of a past, current, or potential future DNSKEY record of the zone defined in the Zone element. The values for the elements in the KeyDigest element are defined in [RFC4034]. The IANA registries for these values are described in [RFC9157].¶
The id
attribute in the KeyDigest element is an opaque string that
identifies the hash.
Note that the id
element in the KeyDigest element is different than
the id
element in the TrustAnchor element described above.¶
The validFrom
and validUntil
attributes in the KeyDigest element specify
the range of times that the KeyDigest element can be used as a trust anchor.¶
The KeyTag element in the KeyDigest element contains the key tag for the DNSKEY record represented in this KeyDigest.¶
The Algorithm element in the KeyDigest element contains the DNSSEC signing algorithm identifier for the DNSKEY record represented in this KeyDigest.¶
The DigestType element in the KeyDigest element contains the DNSSEC digest algorithm identifier for the DNSKEY record represented in this KeyDigest.¶
The Digest element in the KeyDigest element contains the hexadecimal representation of the hash for the DNSKEY record represented in this KeyDigest.¶
The publickeyinfo named pattern in the KeyDigest element contains two mandatory elements: the base64 representation of the public key for the DNSKEY record represented in this KeyDigest, and the flags of the DNSKEY record represented in this KeyDigest. The publickeyinfo named pattern is optional and is new in this version of the specification. It can be useful when IANA has a trust anchor that has not yet been published in the DNS root, and for calculating a comparison to the Digest element.¶
The following is an example of what the trust anchor file might look like. The full public key is only given for the trust anchor that does not have a validFrom ttime in the past.¶
<?xml version="1.0" encoding="UTF-8"?> <TrustAnchor id="E9724F53-1851-4F86-85E5-F1392102940B" source="http://data.iana.org/root-anchors/root-anchors.xml"> <Zone>.</Zone> <KeyDigest id="Kjqmt7v" validFrom="2010-07-15T00:00:00+00:00" validUntil="2019-01-11T00:00:00+00:00"> <!-- This key is no longer valid, since validUntil is in the past --> <KeyTag>19036</KeyTag> <Algorithm>8</Algorithm> <DigestType>2</DigestType> <Digest> 49AAC11D7B6F6446702E54A1607371607A1A41855200FD2CE1CDDE32F24E8FB5 </Digest> </KeyDigest> <KeyDigest id="Klajeyz" validFrom="2017-02-02T00:00:00+00:00"> <KeyTag>20326</KeyTag> <Algorithm>8</Algorithm> <DigestType>2</DigestType> <Digest> E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC683457104237C7F8EC8D </Digest> <PublicKey> AwEAAaz/tAm8yTn4Mfeh5eyI96WSVexTBAvkMgJzkKTOiW1vkIbzxeF3+/4Rg WOq7HrxRixHlFlExOLAJr5emLvN7SWXgnLh4+B5xQlNVz8Og8kvArMtNROxVQ uCaSnIDdD5LKyWbRd2n9WGe2R8PzgCmr3EgVLrjyBxWezF0jLHwVN8efS3rCj /EWgvIWgb9tarpVUDK/b58Da+sqqls3eNbuv7pr+eoZG+SrDK6nWeL3c6H5Ap xz7LjVc1uTIdsIXxuOLYA4/ilBmSVIzuDWfdRUfhHdY6+cn8HFRm+2hM8AnXG Xws9555KrUB5qihylGa8subX2Nn6UwNR1AkUTV74bU= </PublicKey> <Flags>257</Flags> </KeyDigest> <!-- The following is called "KSK-2024" as a shorthand name --> <KeyDigest id="Kmyv6jo" validFrom="2024-07-18T00:00:00+00:00"> <KeyTag>38696</KeyTag> <Algorithm>8</Algorithm> <DigestType>2</DigestType> <Digest> 683D2D0ACB8C9B712A1948B27F741219298D0A450D612C483AF444A4C0FB2B16 </Digest> </KeyDigest> </TrustAnchor>¶
The DS record derived from this example would be:¶
. IN DS 20326 8 2 E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC683457104237C7F8EC8D¶
Note that this DS record set only has one record because the record that would have included the key tag 19036 is already invalid based on the validUntil attribute's value.¶
Trust anchors are available for retrieval using HTTPS and HTTP.¶
In this section, all URLs are given using the "https:" scheme. If HTTPS cannot be used, replace the "https:" scheme with "http:".¶
The URL for retrieving the set of hashes in the XML file described in Section 2 is <https://data.iana.org/root-anchors/root-anchors.xml>.¶
A validator operator can choose whether or not to accept the trust anchors described in this document using whatever policy they want. In order to help validator operators verify the content and origin of trust anchors they receive, IANA uses digital signatures that chain to an ICANN-controlled Certificate Authority (CA) over the trust anchor data.¶
It is important to note that the ICANN CA is not a DNSSEC trust anchor. Instead, it is an optional mechanism for verifying the content and origin of the XML and certificate trust anchors.¶
The content and origin of the XML file can be verified using a
digital signature on the file. IANA provides a detached
Cryptographic Message Syntax (CMS) [RFC5652] signature that chains to
the ICANN CA with the XML file.
This can be useful for validator operators who have received a copy
of the ICANN CA's public key in a trusted out-of-band fashion.
The URL for a detached CMS signature
for the XML file is
<https://data.iana.org/root-anchors/root-anchors.p7s>.¶
Another method IANA uses to help validator operators verify the content and origin of trust anchors they receive is to use the Transport Layer Security (TLS) protocol for distributing the trust anchors. Currently, the CA used for data.iana.org is well known, that is, one that is a WebTrust-accredited CA. If a system retrieving the trust anchors trusts the CA that IANA uses for the "data.iana.org" web server, HTTPS SHOULD be used instead of HTTP in order to have assurance of data origin.¶
IANA used to distribute the trust anchors as a self-signed PGP message and as a self-issued certificate signing request; this was described in [RFC7958]. This document removes those methods because they relied on a trust model that mixed out-of-band trust of authentication keys with out-of-band trust of the DNSSEC root keys. Note, however, that cryptographic assurance for the contents of the trust anchor now comes from the web PKI or the ICANN CA as described in Section 3.2. This cryptographic assurance is bolstered by informal comparisons made by users of the trust anchors, such as software vendors comparing the trust anchor files they are using.¶
This document describes how DNSSEC trust anchors for the root zone of the DNS are published. Many DNSSEC clients will only configure IANA-issued trust anchors for the DNS root to perform validation. As a consequence, reliable publication of trust anchors is important.¶
This document aims to specify carefully the means by which such trust anchors are published, with the goal of making it easier for those trust anchors to be integrated into user environments. Some of the methods described (such as accessing over the web with or without verifying the signature on the file) have different security properties; users of the trust anchor file need to consider these when choosing whether to load the set of trust anchors.¶
The body of this document does not specify any particular behavior for relying parties. In specific, it does not say how a relying party should treat the trust anchor file as a whole. However, some of the contents of the trust anchor file require particular attention for relying parties.¶
Note that the validUntil
attribute of the KeyDigest element is optional.
If the relying party is using a trust anchor that has a KeyDigest element
that does not have a validUntil
attribute, it can change to a trust anchor
with a KeyDigest element that does have a validUntil
attribute,
as long as that trust anchor's validUntil
attribute is in the future and the
KeyTag, Algorithm, DigestType, and Digest elements of the KeyDigest are the same as the previous trust anchor.¶
Relying parties SHOULD NOT use a KeyDigest outside of the time range given
in the validFrom
and validUntil
attributes.¶
A KeyDigest element can contain both a Digest and a publickeyinfo named pattern. If the Digest element would not be a proper DS record for a DNSKEY record represented by the publickeyinfo named pattern, relying parties MUST NOT use that KeyDigest as a trust anchor. A relying party that wants to make such a comparison needs to marshall the elements of the DNSKEY record that became the DS record using the algorithm specified in Section 5.1.4 of [RFC4034].¶
Relying parties need to implement trust anchor matching carefully. A single trust anchor represented by a KeyDigest element can potentially change its Digest and KeyTag values between two versions of the trust anchor file, for example when the key is revoked or the flag value changes for some other reason. Relying parties which fail to take this property into account are at risk of using an incorrect set of trust anchors.¶
Each time IANA produces a new trust anchor, it MUST publish that trust anchor using the format described in this document.¶
IANA MAY delay the publication of a new trust anchor for operational reasons, such as having a newly-created key in multiple facilities.¶
When a trust anchor that was previously published is no longer suitable for use,
IANA MUST update the trust anchor document accordingly by setting a validUntil
date for that trust anchor.
The validUntil
attribute that is added MAY be a date in the past or in the future, depending on IANA's operational choices.¶
More information about IANA's policies and procedures for how the cryptographic keys for the DNS root zone are managed (also known as "DNSSEC Practice Statements" or "DPSs") can be found at https://www.iana.org/dnssec/procedures.¶
[RFC7958] defined id-mod-dns-resource-record, value 70, which was added to the the "SMI Security for PKIX Module Identifier" registry. This document no longer uses that identifier.¶
This version of the document includes the following changes:¶
There is a significant technical change from erratum 5932 <https://www.rfc-editor.org/errata/eid5932>. This is in the seventh paragraph of Section 2.2.¶
Added the optional publickeyinfo named pattern with two mandatory elements, PublicKey and Flags.¶
Removed the certificates and certificate signing mechanisms.¶
Removed the detached OpenPGP signature mechanism.¶
The reference to the DNSSEC Practice Statement [DPS] was updated.¶
Say explicitly that the XML documents might have XML comments in them.¶
Clarified the use of the detached CMS signature.¶
Updated the IANA Considerations section to indicate requirements on IANA.¶
Simplified the description of using the validFrom and validUntil attributes.¶
There was a bit of editorial cleanup.¶
The first KSK for use in the root zone of the DNS was generated at a key ceremony at the ICANN Key Management Facility (KMF) in Culpeper, Virginia, USA on 2010-06-16. This key entered production during a second key ceremony held at an ICANN KMF in El Segundo, California, USA on 2010-07-12. The resulting trust anchor was first published on 2010-07-15.¶
The second KSK for use in the root zone of the DNS was generated at key ceremony #27 at the ICANN KMF in Culpeper, Virginia, USA on 2016-10-27. This key entered production during key ceremony #28 held at the ICANN KMF in El Segundo, California, USA on 2017-02-02. The resulting trust anchor was first published on 2018-11-11.¶
More information about the key ceremonies, including full records of previous ceremonies and plans for future ceremonies, can be found at <https://www.iana.org/dnssec/ceremonies>.¶
Many pioneers paved the way for the deployment of DNSSEC in the root zone of the DNS, and the authors hereby acknowledge their substantial collective contribution.¶
RFC 7958 incorporated suggestions made by Alfred Hoenes and Russ Housley, whose contributions are appreciated.¶